
	Site Map

	Technologies

	Nanocarbonic materials

	Catalogue

	Publications

	Documents

	Question Answer

ТМСофт. Разработка и внедрение ПО в области автоматизации грузовых жд перевозок.

Production

Graphite Foil "ТМG" | Sheet materail "ТМG" | Braided Packing “ТМG” | Spiral-wound gaskets

Graphite Foil "ТМG"

Flexible graphite foil made of thermo expanded graphite of the grade "Тermografenit" (ТМG), which was produced under the technology based on a special method of purification, chemical and thermo processing of natural crystalline graphite with consequent rolling without stickers, and applied in industry by research-and-productionenterprise ООО "ТМSpetsmash" (City of Kiev,Ukraine).

Primary application of the foil "ТМG": production of gland seals for pipeline fittings, centrifugal pumps, gaskets for flange connections:

Production of the flexible tape for sealing of the friction units and static joints;
Production of the spiral-wound gaskets;
Pressing of sealing rings for friction units of the pipeline units and rollers of the centrifugal pumps;
Production of yarns reinforced by glass and cotton fiber or SS wire for the consiquent manufacturing of the graphite braided packing;

Heat resistance: in the open air - 450°С, at the squeezing in moulds - 600°С, in water steam conditions - 560°С, in inert atmosphere - 3000°С. Foil “ТМG” is chemically and biologically inert (is used at рН = 0-14), radiationally resisting, nontoxic, does not sustain combustion, flame- and explosion-proof, does not deteriorate, has antifriction properties, does not wear out rollers and rods.

Performance Specification of the Foil ТМG:

Rolls’ size		Thickness, mm	Thickness defect, mm	Density, ^g/сm³
Width, mm	Lenth, mm	Thickness, mm	Thickness defect, mm	Density, ^g/сm³
500 1000	Not normed	0,2-1,0	0,025-0,020	0,5-1,2

Chemical Composition of the Foil ТМG according to the grades:

Grade of the Foil ТМG	Index of the standard
Grade of the Foil ТМG	Carbon content, %, not less	Ash residue, %, not more	Sulfur content, %, not more	Chlorions content, ррm, not more
А1	99,85	0,15	0,05	20
А2	99,85	0,15	0,10	20
В1	99,5	0,50	0,05	40
В2	99,5	0,50	0,10	40
С1	99,0	1,0	0,10	40
С2	99,0	1,0	0,13	40

Physicochemical Performance Specification of the Foil ТМG:

	Index	Standard
	Tensile strength in the line of rolling, МPа	3,5 - 7,0
	Tensile strength against the line of rolling, МPа	3,0 - 6,0
	Heat conductivity in the line of a sheet, W /K×m	130 - 200
	Electrical resistance in the line of a sheet, Ohm×m	6,5 - 10,0 10⁶
	Compressibility in free state under pressure of 35 МPа, %	35 - 40
	Restorability after pressure releif of 35 МPа, %	10 - 20
	Density, g/сm³	0,5 - 1,5
	Loss of weight percent of the stuff under burning (450°С,one hour), %, not more	0,3
	Coefficient of steel friction 07Х15Н6 in accordance with all-Union State Standard 5632, not more	0,11